Cover design, brutal realities

16 November 2015

Nowadays, it is rare that an academic book is seen in an actual bookstore (and, if it is, not for long). Price is a factor here (see below). There are exceptions, of course, one of them for NIAS Press being Chris Hudson’s Beyond Singapore Girl, which continues to resonate (and sell) especially in the Singaporean society it analyses.

But as discussed elsewhere the brutal reality for most books found in any bookstore is to appear spine-out – as can be seen in this line of books recently photographed in a Kinokuniya bookstore in Singapore.

Kino-bookshelf

The same goes for books found on library bookshelves.

Very few books are displayed cover-out in all their glory. In bookstores, normally full-frontal display is reserved for bestsellers or those other titles being heavily promoted (sometimes publishers pay booksellers for such special treatment, not least a premium location inside the store).

Since academic books rarely appear in bookstores, do covers matter then?

Arguably, yes. Bookstores and libraries are not the only places where books are visible. Physically they also will appear in conference exhibits, on display at the author’s home institute and certainly in her own office. But in a host of other places, a book’s cover is visible – in marketing material (catalogues, flyers, etc.), newsletters and (not least) face-out on the virtual bookshelves of all of the online bookstores.

Compare the listings on Amazon.com of the same book by Chris Hudson with a book from a different gender series from another publisher. Personally, I know which book I would rather show my colleagues, friends and family.

compare-covers

We’ll say nothing about the price (though obviously this matters, especially if the book buyer is an ordinary person with limited funds).


Doing just fine

26 April 2013

A lot of aspiring authors put their energies into getting published and assume the sales will look after themselves. They are wrong; as I have said before, all authors need to shamelessly self-promote themselves, especially in today’s economic climate. Nor is it just that you should never trust your publisher to do all the necessary hustling; you cannot even rely on the booksellers to do their job – something that I was reminded of once again the other day.

While attending a conference in the beautiful Dutch town of Leiden this week, I went for a stroll during a lunch break and found myself outside the Leiden branch of Van Stockum, a Dutch bookseller regularly buying our books. Inside, one of the staff was happy to answer my idle questions – for instance, who our customers were likely to be and how the business of selling books was going.

van-stockum

A constant refrain of academic publishers is that library sales are falling without being offset by rising personal purchases (on the contrary) while income from digital sales is negligible. My informant confirmed that library budgets in the Netherlands were tighter and this had affected sales but individual purchases were holding up. That said, a lot of bookstores were in trouble with many closing down.

Why?

Village bookstores have been badly affected by the global economic crisis; there are few book lovers to begin with here and, in the last resort, the latest novel by Donna Leon or a new history of baroque music is a discretionary purchase.

In the cities it is another matter. And that was when the conversation got very interesting. Traditionally, the cities have been full of book-buying students and professionals, housewives and pensioners (among others). Catering to this market, in recent decades we have seen the rise of chain bookstores like Waterstones in England and Borders in the States. Now the chains are in trouble.

Just as in the villages, discretionary spending has dropped and of course more people are buying online; many Dutch readers are quite happy to read the English edition of (say) Haruki Murakami’s 1Q84 if the price is considerably lower than the Dutch edition. But where the chain stores are especially hurting is that – in pursuit of rationalisation and greater profits – they chopped their specialist staff, the people who knew what penny-pinching scholars from the Department of This’n’that at Leiden University would be interested to buy. In the good times this didn’t matter; now it does.

We can be certain that the hard times are affecting all, that booksellers like Van Stockum who still focus on quality are nonetheless also feeling the pinch. Even so, university budgets may be down but scholars still need to read books and many wish to have their own copies ready to hand. Selling books, then, is harder than it was but quality bookstores … they’re just fine.

The problem is that’s not enough. Such quality bookstores are few in number. As argued in my last post, it is time for authors to use their personal contacts, Twitter, whatever to point readers towards a bookstore like Van Stockum.


Advances

24 November 2010

The arrival of advance copies of a book is a special moment. Emotionally, the book is out; it is real. This is the moment to feel it was all worthwhile (and to brag just a little).

There is more to advance copies than feeling good and bragging, however. They have several other purposes.

A final check

For the publisher this is a last chance to discover and rectify errors. True, the book is printed so any changes are limited unless reprinting is decided upon. But should this be necessary (or, say, an errata slip inserted in the book), then at least this can be done before the books are shipped all over the world.

Review copies

Sometimes, publishes will send advance copies of the book to a few key journals as well as to the news media. Timing is critical here. Some publications like the Library Journal in the U.S. will only accept new titles for review several months ahead of publication, the idea being that the review is before publication of the book. It may be impossibly early for ordinary advances copies to be used here and instead such early review copies are usually galley proofs but today it is just as easy (if not more so) to deliver an ‘advance copy’ specially printed by a POD printer ahead of the main litho printing.

The news media also want early review copies but here timing is even more tricky. The essential nature of the media is its short attention span and the ephemeral nature of its product (today’s news is tomorrow’s fish-and-chip paper, as we used to say). As such, any news or reviews of a book carried in the press tend to be within a few days of publication; review copies may well have been sent to the journalists only a week before. As such, publishers will only send copies to the media when they are certain that sale copies of the book will be available within a few days. Given the vagaries of shipping times, then, the publisher may judge it wise to hold back on sending such advance copies to the press or instead may send these advances but request an embargo on coverage until after sale copies of the book are available.

Obviously, such time sensitivity and media awareness only relates to those few academic books that are either timely and/or controversial.

Marketing copies

A common use for advance copies is as conference exhibits. For instance, in my own field, a key conference held each year in late March is the General Meeting of the (U.S.) Association of Asian Studies. Among the several thousand delegates attending will be librarians scouting for interesting additions to their collections. Also there will be teachers scrutinizing the latest titles in their field and deciding which (if any) should be adopted for course use in the new academic year. Ensuring that an advance copy is on view at the conference can have a major effect on sales.

For this reason, too, it is common for a publisher’s distributors to want copies of the book ahead of arrival of their shipped copies.

Reference copies

Given the competing demands for copies of the advances, it would be easy for the publisher to end up with none. This happened to me recently when inadvertently our only remaining advances of a controversial new title were exhibited and then sold at a big conference. Afterwards, it was embarrassing that I had no copy on hand when discussing the book with various concerned parties. Reference may not be a glamorous use of advance copies but it is an important one.

Author advances

That said, all things considered, in my opinion the prime use of advance copies is to reward the author with a foretaste of things to come. The hard grind finishing the book is over but equally important is the author’s promotion of her/his book in the months (and years) that follow. This vital contribution to the success of their book is not appreciated by most authors. (More about this in a later post.)

Authors may not get all of their author copies before the main shipment has arrived but it is usual that they receive one or two copies. Of course, any serious bragging at the book launch requires delivery of the main shipment (one point of the launch being to sell lots of copies to those attending) but often these advances are very useful to authors, arriving just in time to be shown at an important meeting or job interview.

Now

But such meetings and interviews are in the future.  It is now that the bell rings at the reception counter of your workplace. A courier stands there with a brightly coloured package. You sign, barely noticing as the courier leaves. Inside you can feel the copies. The Book, it has arrived, your child is born.

Enjoy the moment while it lasts. Getting a few advances from the printer is quick by courier but, as we shall see, shipping the rest of the copies to the warehouse and then out into the libraries and bookstores can take forever (or so it feels). More about that in my next post.

(Post #9 of the Printing section of a lengthy series on the book production process, the first post of which is here.)


Printing revolutions

7 June 2010

Most of us have a secret vice, something we don’t usually brag about. Mine is that I balance all the serious, academic material I read on the job by consuming more trashy literature in my spare time – thrillers, historical fiction and (especially) crime. And in a word, that’s what I do: consume – borrow what I can via the Danish library system (quite a lot) and for the rest buy via an internet bookseller. Once I’ve read a book, I pass it on to another or even (and this enrages my wife) throw it away.

This may be a vice but it’s a darn sight cheaper than going to the movies.

You may be wondering, what’s this got to with printing? Quite a bit, as we shall see.

e-This, e-That

Nowadays we hear a lot about the internet revolution and how this is ushering in a new era of e-books, ‘green publishing’, greater consumer choice, etc., etc. Gone will be the days of that dinosaur, the printed book. Gone, too (though this is hardly talked about) will be the bookshop and that creaking edifice, the book trade, which sustains it.

Indeed, it is said, the printed book has only ten five two years of viable life left in it. Game over, enter the Kindle, the iPad or something that will prompt us all to go digital – and go digital all the way, 100%.

There is, however, a wee fly in the digital ointment. Another revolution is also in full swing: a printing revolution.

e

p-This, p-That

The computer and advent of digital communication have brought us the internet but they have not been the only technological developments happening. Globally, there has been a general shift from electro-mechanical to electronic technology. This has had an impact on all areas of life and all types of consumer product (think about modern cars, washing machines and telephones, for instance).

It has also had a major effect on the whole production process in publishing. In an earlier post, I described the changes in typesetting technologies and practices in recent years. Fundamental changes have also affected the printing world but here the transformation is incomplete and indeed several different developments are happening at once. Some of these are:

  • Printing presses are becoming faster, more sophisticated and can print fewer copies than before at an economic price.
  • Introduction of new print-on-demand (POD) technology has made single-copy printing feasible.
  • Some big booksellers are thus experimenting with in-store printing of stock.
  • The globalization of bookselling and entry of non-traditional retailers like supermarkets have driven down book prices dramatically. This is forcing publishers to cut costs, hence they are squeezing printers and other suppliers.
  • Printing prices are falling, not least because publishers have become willing to go offshore to find the best printing deal. In academic publishing especially, there has been a major shift of production and printing to India and China.

Let’s explore some of these points in greater detail.

Traditional book printing

Traditionally, books have been printed using offset lithographic presses in a lengthy process that essentially has three phases:

  • Pre-print: converting the material for printing to a print-ready state. (Once upon a time, typesetting was carried out at the printing works and was part of this phase.)
  • Physical printing of the book pages and cover material.
  • Gathering and binding of the printed sheets and covers into finished books.

Here, the presses must be set up for each new print job. This is time-consuming and expensive but, once done, copies can be printed off at very little additional cost. That means there is a high initial cost to be distributed over the number of copies printed at low individual cost. The more books are printed, the lower the share of initial costs applied to each copy.

Offset printing is thus good value for print quantities of hundreds or thousands of copies. As such, it is still the dominant form of printing carried out today. However, it is ruinously expensive if you only want dozens of copies, or even just a single one.

Enter POD

Major hassles for publishers are reprints (when, say, only a few copies are needed), overstocks and warehouse storage in general. The advent of new, digital print-on-demand technology in the 1990s promised a solution to these problems. Well, the solution isn’t there yet (especially in the early days, the print quality of POD copies was far inferior) but the prospect of a solution is still there.

With POD, publishers do not print books for their warehouse shelves, but only print as and when orders are received. Printing digitally means that there are few set-up costs, so the unit cost is the same whether you print one book or 1,000. Many printers now offer such a digital service but in addition warehouses are now offering such POD services.

The trouble is, though, that – while the unit cost of printing small quantities or even single copies is much lower than for offset printing – it is still too high to be profitable for the initial printrun for most publishers. In practice, POD is therefore mainly used as a service to authors, keeping their books in print indefinitely. But the hope is that in the near future unit prices can come down to a level where POD-only publication becomes a real option.

Printing inside the bookstore

Print-on-demand technology has developed to the point where proponents now talk of placing POD printing equipment in every bookshop. Instead of carrying stock in the form of books, then, bookshops could become ‘content kiosks’ where customers browse through files before placing print orders for immediate execution, a little like today when ordering ‘instant’ passport photos from a camera shop. By the time you have had a latte in the bookstore’s in-house cafe, the book you ordered is ready for collection.

The aptly named Book Expresso machine offers such a service. I described it in operation in an earlier post.

Currently, the initial investment in equipment is huge and beyond the reach of smaller bookshops. It is also quite likely that shops would continue to carry a certain amount of stock for impulse purchases, so we would be surprised if bookshop fronts became as small as passport photo booths. But it could happen, and POD systems are already being trialled in a few major bookshops (at Blackwells on Charing Cross Road in London, for instance) and at least one large library.

The question is, of course, unless that latte is exceptionally good, why people should continue bothering to visit bookshops if the browsing experience becomes limited to looking up a print catalogue? That could be done at home over the net.

The p-book isn’t dead yet

As a result of these printing revolutions and the associated bookselling price war, all of those thrillers, ‘krimis’ and historical novels which I buy are getting relatively cheaper to buy. Indeed – morality and the fate of our planet aside – I can afford to consume and discard them.

Yes, I’m taking away Gibbon’s Decline and Fall of the Roman Empire to read on our iPod Touch this summer. I also look forward to buying an iPad sometime soon. But for my serious reading, for the meantime at least, I’ll be sticking to physical books. I am not alone here – and that has major implications for publishing and bookselling, whatever the hoopla is about e-books.

More specifically, the knock-on effect is it’s likely your book will be more than just an ethereal digital being. It will be printed, become a physical object, something to fondle and show to your mum.

So, after this long digression, let’s follow that process of physical creation. This starts with the publisher doing a final check before sending the print files.

(Post #2 of the Printing section of a lengthy series on the book production process, the first post of which is here.)


Meet the designers (and typesetter)

9 January 2010

In publishing these days, almost everyone looks the same. Yes, clothing and hairstyle may differ (and let’s not forget attitude, accent and class) but everyone works on a computer. Look more closely, however, and the differences become more apparent. What sort of computer are we talking about and which software is being used? Who is the press insider and who the hired help?

Origins

In former times, the differences were clear. Editorial and marketing staff were office types, the former usually middle class (if not upper class) and intellectual, the latter often seen as more common and tainted by money. Increasingly, women were commonplace. In contrast, typesetters rubbed shoulders with the printers and got their hands dirty; they were craftsmen, working class and blokes. They were also part of the industrial elite.

Designers lay somewhere in-between. They, too, learned a craft but design was (and is) one of the creative professions; one should expect to work closely with architects, engineers, artists and other creative types as well as with people in advertising and marketing, areas where creativity is valued.

The computer revolution changed this picture, typesetters moving from setting metal type on-site at the printing works to setting virtual type on screen on big typesetting machines located elsewhere. The PC and desktop-publishing (DTP) revolutions completed the transformation. Today, virtually every designer and typesetter works on a computer. The old days of real cutting and pasting have gone.

Amateurs and distance workers

What the DTP revolution also allowed, however, is a dramatic decline in the use of qualified designers and typesetters in the publishing industry. Partly, this was a result of cost-cutting by presses but the trend is also in keeping with the industry’s origins as a profession for gentlemen, an industry distinguished by the work of gifted (and not so gifted) amateurs.

Especially in smaller presses, then, it is quite common for editorial and marketing staff to undertake design and typesetting work. For instance, though without the slightest design or typographic training, I design almost all of the covers for books published by NIAS Press, typeset the occasional book and in the past have even created customized fonts to meet our needs. Such involvement is not at all extraordinary.

This ‘democratization’ of design and typesetting work has also meant that it can be passed on to low-paid amateurs, of course, and indeed outsourced to ex-industry professionals now working freelance and costing less than if they were on the press staff. Moreover, in recent years, outsourcing of typesetting and other pre-press work to India by Western presses is increasingly common. (Several earlier posts have discussed this issue, most notably this one. Click on ‘outsourcing’ in the right-hand tag cloud to view all of these posts.)

That said, although many presses have cut costs by outsourcing or employing low-cost amateurs and/or by the use of template designs, some presses still find it worthwhile to employ professionals to undertake this work.

I suggest you keep this nuanced picture in mind in the description that follows and in subsequent posts dealing with design and typesetting.

Different types, much in common

In the new democracy of design and typesetting, it is quite possible for the designer and typesetter to be one and the same person; chances are they are different, however – or that the typesetter creates the page design but the cover design is assigned to a specialist cover designer.

This is not surprising; the work has much in common but it is not the same. Typesetters and page designers should obviously care about the aesthetics and accessibility of a text but a central concern is ‘fit’ – how to ensure that the finished book ends up with the number of pages it is supposed to have (and hence keep printing within budget).

In contrast, the cover designer must produce covers that are attractive to look at and ideally also a bit intriguing to encourage potential buyers to pick up the book. At the same time, cover designers must satisfy a number of practical concerns such as that the cover works both when viewed face-out (as it should ideally be seen) and spine-out (as on the shelf of a bookshop or library).

That said, there is much in common between designers and typesetters. Both work with an intimate knowledge and appreciation of spatial relationships, colour and fonts, and both need to be skilled at using images to good effect and at enhancing image quality.

For their work, moreover, both designers and typesetters are likely to use a powerful Macintosh computer running highly specialized software. Because of its superior graphics capabilities, the Mac has long been dominant in both pre-press and printing work. (It was this tiny but lucrative slice of the computer market that allowed Apple to survive during the long years of otherwise utter Windows dominance.) The domination of Abobe Creative Suite as the software package of choice is more recent but with InDesign, Photoshop, Illustrator, Flash, Acrobat and more, use of the package is almost inescapable.

This can be seen in the next few posts, which deal with the page design and cover design.

(Post #3 of the Design & Typesetting section of a lengthy series on the book production process, the first post of which is here.)


Design matters

5 January 2010

The Biblical observation that men do not hide their light under a bushel but raise it high to light the whole house applies equally to the work that already has been done on your manuscript and the work still to come that will transform it into a book.

The purpose of the editing, and indeed of the author revisions preceding it, should be to polish the text and ensure that it communicates its meaning. But thereafter the book design and subsequent typesetting become hugely important – if content is king, it should be dressed accordingly; the book design should illuminate the contents, not obscure them.

Time and again, publishers fail to heed this imperative and the result can be that a major work fails to gain the recognition it deserved.

What should have been a prize-winning study

I still regret one such instance in my career when, due to my failure to keep the author in check, her opus magnum ballooned to an alarming number of words and illustrations. I also designed the book and at first glance it was beautiful. Even so, it weighed in at over 500 pages, a hundred more than it was first announced at. The book went on to almost win an important book prize; arguably it should have won. For me, however, the moment of truth was feedback from Winnie, a trusted Singapore colleague, who complained that she had tried several times to read the book but ‘got tired’.

Was it the design? I believe so. The font size was too small; the number of characters per line was way over the 65 that is the golden mean (more like 89). The result will have been eye strain for many readers. In a nutshell, there was a readability issue. Probably, the book should have been 600 pages long – or edited more assertively.

This is just one way in which a bad book design can get in the way of readers fully appreciating an author’s argument. A layout that is ugly or boring is just as bad, likewise one whose text uses fonts that are unsuitable for extended reading. Also problematic is a book size that is unhandy (too big or too small, awkward or tiresome to hold, etc.).

Enter the queen

Many readers will struggle with a bad book design (often unconscious of what is bothering them) if they consider the contents important enough. Here, however, the presumption is that the work is to hand. But what actually ensures that a reader buys or borrows a copy of your book? Is it the contents? The marketing? Actually, in many cases, what sells a book is its appearance, its initial impact, something that briefly attracts the reader’s eye to that book and guides her hand to take it off the shelf.

Once a copy has been sold, it’s quite different; what you say becomes more important than appearances. But – for a brief moment – the look and feel of your book is paramount. Content may be king, but design is the queen who by appearance attracts the most initial attention.

The cover matters

The internal book design can be important in the purchase decision-making, but only after the book has been picked up. Initially, then, the most important design element is the book cover (or jacket), something that some publishers don’t seem to care about. In a recent post on H-ASIA, Peter Matanle of the University of Sheffield complained that:

… the cover is really important for a book yet some publishers do not pay sufficient attention to this aspect of book design, preferring simply to make it conform to a series or even publisher style. Often there is no information about the book anywhere on the front or back cover beyond printing the main title and author’s name. Often there are no unique graphics on the cover and no endorsements or short summaries on the back cover to entice a reader in.

His explanation for this (bad) behaviour was that:

… the publisher may be more interested in creating its own brand image than in taking care over the content of the volume, and that the publisher is actually not that interested in post publication marketing either …

Actually, I rather suspect that the publisher’s behaviour is largely shaped by the expectation that nearly all copies sold will be to libraries, and they tend to buy on the strength of the book description, the price, etc., not on the book’s appearance. However, with the continued collapse in library market sales, such a policy seems rather short-sighted.

Like it or not, bookshops and individual book buyers matter, and that means that the cover matters, indeed design matters.

Sounds like it time that you meet the designers.

(Post #2 of the Design & Typesetting section of a lengthy series on the book production process, the first post of which is here.)


Announcing your book

2 January 2010

Oops! Before launching into several posts dealing with design and typesetting (starting with the importance of design), it would be smart first to deal with another burning issue: the kick-starting of the marketing/promotion of your book.

Promoting your book is a huge endeavour that I’ll cover in a series of posts after we have finished discussing the production phase. However, at this point (at the end of the editorial thread) it’s probably a good idea to describe the beginning of that promotional process – the announcement of your book – because this is something that happens really early and demands your participation.

Perhaps it doesn’t seem a big deal to announce your book but in fact there’s a lot involved. Moreover, a proper announcement is crucial to a book’s subsequent success.

Why?

Essentially, the success of your book will depend on the interest and efforts of a few key actors in the book trade. They need early but accurate information about your book. These key actors are:

  • Your publisher’s sales and distribution network. Warehouses need to load details of your book on their system so that orders can be taken and shelf space planned for. Whereas warehouses care only for accuracy, sales representatives prefer their information in headlines and punch lines. Sales reps often only visit bookshops every six months hence early notice of new titles is imperative. The same imperative applies for your publisher’s distributors and agents around the globe but they need far more information and packaged in a specific way.
  • Bibliographic data providers. When you order a book from a bookshop, they will do this using information purchased from companies like the UK-based Nielsen BookData and US-based Bowker. If (like Amazon) they have an online catalogue that you can browse, this too is built using such externally provided data. Libraries rely on similar information. As such, if your book is to be visible to bookshops and libraries, then its details must be provided by your publisher to these bibliographic companies.
  • Booksellers. If a bookshop is to stock copies of your book at publication, then it must budget for this purchase (and perhaps plan on where these copies will be displayed). Typically, books are ordered at least three months ahead of publication. Bookshops thus need their information early, briefly, and in a highly standardized format.
  • Wholesalers. For bigger-selling titles, many bookshops are likely to order stock from wholesalers rather than individual publishers’ warehouses. This way they can consolidate orders and maybe command bigger discounts. The warehousing needs are the same, of course. The mega-sized warehouses of these wholesalers need to load details of your book on their system so that orders can be taken and shelf space planned for.
  • Library suppliers. Until recently, library suppliers sent out bibliographic information to their library customers on CD. This required a lead time of six months. The timeliness of data has greatly improved with its online provision but the library purchasing cycle still demands early advice of new titles. Because libraries generally work on an annual budget,  for library suppliers it is crucial that a book is received and paid for in the correct year.
  • Libraries. Not only do libraries want information early so they can plan their budgets, but also they want much greater detail. This is because often the purchasing decision is made by a specialist in the subject and, once made, is normally irreversible (libraries do not have the equivalent of the sale-or-return right enjoyed by bookshops).

As you can see, each of these key actors requires quite different sets of information. At the same time, however, a publisher’s marketing department has only so many minutes in the day. As such, it is likely that your book will be first announced by the following means:

  • An advance information sheet, sent to key customers as soon as possible.
  • An entry in your publisher’s next catalogue (and those of its international distributors and agents), though it may be months before these catalogues are produced and disseminated.
  • Brief details on your publisher’s website, loaded immediately (though not by all publishers – strangely, I feel, some publishers display no details on their website until the book is out).
  • Bibliographic data, sent individually and directly to Nielsen BookData, Bowker, etc. before any information goes out to potential customers.

Timeliness of the announcement is of essence here. More customized and targeted marketing of your book will follow (more about that in a few weeks time).

What is needed to produce this material are:

  • a book description
  • bibliographic details (format, price, extent, publication date, readership, etc.), and
  • a first draft of the cover

This, in turn, will require your input in the following ways, by:

  • completing and returning your author/marketing questionnaire
  • identifying and (ideally) approaching well-known and/or trusted figures in your field, asking them to write an endorsement of your book for inclusion on the (back) cover and in marketing material, and
  • being actively involved in the cover design (though not all publishers welcome this)

I’ll return to this material and your involvement in its production in a few weeks time after finishing the different threads on book production. Meantime, back to the posts on design and typesetting.

(Post #1 of the Marketing & Promotion section of a lengthy series on the book production process, the first post of which is here.)


2010 starts tomorrow

30 September 2009

Tomorrow is October 1st, time for a new year on the copyright page.

What?????

It would be reasonable to assume that the copyright date on a book matches the calendar year in which a book is published, wouldn’t it? Well, yes. However, this isn’t so. (Nor is this date the same as the release date.) Rather, a convention among publishers is to use the next year’s date in the copyright notice for any book published on or after October 1st.

This practice confuses many authors when first they encounter it but really the answer is simple. Moving books from one warehouse to another (or from printer to warehouse) can take weeks. Add to this the time to deliver a book from warehouse to bookshop – and for a customer to then come in, find and purchase that book – and, before you know it, more than two months have elapsed. Suddenly it’s January and that brand new book now looks like last year’s book.

Perceptions matter – as simple as that.


What do publishers want?

25 September 2009

Like everyone else (and especially like their authors), publishers want to be successful. Just how they get there is another matter, one that baffles some authors and leaves others enraged.

Perhaps the best way to approach this, then, is to understand where publishers are coming from and where they are going to.

Environment

I have described the woeful state of academic book publishing earlier (and no doubt shall do so again) and also pondered on the very survival of publishing but here are a few quick points:

  • There has been a dramatic decline in library sales, the bread and butter of academic publishing, in part due to rising periodical subscription charges and IT costs swallowing bigger chunks of libraries’ budgets.
  • Sales to individual scholars have also fallen, in part because too much is being published (thus hard for scholars to maintain comprehensive, personal libraries).
  • No significant new source of income has yet been tapped.
  • Falling sales have prompted publishers to raise prices causing further falls in sales.
  • The recent global recession has seen universities cutting back on their funding for their presses (indeed, some university presses have been closed or sold off in recent years).
  • New print-on-demand (POD) technology is allowing single-copy printing but, though this is excellent for reprints, it is not cost-effective for quantities over 300 copies (and for most books an initial printrun under this amount is not commercially viable).
  • The POD revolution may lead to on-demand ordering/printing for consumers (e.g. using the Book Expresso machine described here), leading to the death of the traditional bookshop and end of the current global book supply chain.
  • There is a proliferation of e-book readers, none of them particularly good yet in terms of reading for extended periods of time but the likelihood is high of an ‘iPod moment’ in e-publishing within the next five years.
  • Hopes of new income from electronic sales are driving massive investment in e-publishing but economic returns to date have been negligible (and, worse, this development undercuts the status of the printed book, currently the prime revenue earner).
  • Demands from funding agencies for Open Access is pushing publishers into offering free electronic content but a viable business model for this is not yet in place.
  • Copyright, the bedrock of the publishing business model, is under attack from several quarters, not least because it is seen as incompatible with the internet and e-publishing revolutions.

Some of these developments will have a huge impact on the future shape of publishing and already today they shape publishers’ perceptions and expectations.

Which publisher?

Another key point – but one that many people lose sight of – is that (unless you are dealing with a really small press) ‘the publisher’ is more than one person.* Each has their own personality, interests and agenda. Over and above that, an author will encounter at least three faces of a publishing house:

  • editorial (focused more on scholarly content)
  • production (focused on costs and deadlines), and
  • marketing (focused on financial returns).

These divergent interests interact, not always coherently, nor to the benefit, comprehension or sanity of the author.

(*Note: Actually, in any publishing house, the publisher is often one person but here we are taking about ‘publisher’ in another sense.)

Ramifications

OK, so these are some of the places where academic publishers are coming from but what effect has this environment (and recent changes to it) had on publishers’ expectations and behaviour? The main effect is that today academic publishers are taking a more hard-nosed, commercial approach to the books they publish than was the case a decade ago. In concrete terms, the key changes are:

  • Increased commercial behaviour.
  • Cost cutting, outsourcing of especially production work to outsiders, and increased workloads and stress for remaining in-house staff.
  • The rising power of marketing departments and corresponding decline in the power of editorial staff to decide what is published.
  • Editors must take the bottom line into consideration when signing up a new title.
  • Each new book project must stand or fall on its own merits (far less cross-subsidization).
  • Demands for author subventions are more common.
  • Greater aversion to financial risk, hence to taking on book projects that look commercially unpromising or expensive to produce.
  • A far greater proportion of book proposals and manuscripts are rejected.
  • A big increase in the number of ‘crossover’ titles (of interest beyond an academic readership) and interdisciplinary titles.
  • Greater willingness to publish purely commercial titles (aimed at the general public) with little or no scholarly value.
  • Reluctance to publish highly specialized studies.
  • Reluctance to publish edited or multi-author volumes (more about this in a latter post).
  • More ‘fad’ and ‘me-too’ publishing as publishers seek to emulate the successes of their competitors.

Hit list

Although these developments have wrought great changes in publishers’ expectations and behaviour, what publishers want from their authors is not all that different than before (though there may be far less flexibility and room for compromise than there was in the past). Here are some of these wants and desires:

  • Publishers want to publish only books that will succeed. This has important implications for what book projects are viable, and hence for how you formulate and develop your book project, find its ‘right’ publisher(s), and pitch it to them.
  • Once a book proposal *is* accepted, the publisher wants the book to succeed. This requires full commitment from publisher and author, and no half measures from either side.
  • Your publisher expects you to deliver the manuscript that was agreed upon (and contacted). If different, make sure that the manuscript is far better than promised (and accept that this is not something for you alone to judge).
  • Your publisher requires you to be a team player working your butt off to achieve the book’s final publication; tasks assigned will be finalized swiftly and efficiently (and without any comment or criticism of the publisher’s own delays and failures!)
  • At all time (not just after publication), the publisher wants you to tirelessly promote your book to its widest possible readership, especially by utilizing channels and contacts not available to the publisher.

All the rest is detail.

But coming later …

That said, a detailed ‘bitch list’ is something that I shall prepare one day soon, possibly together with my assistant, Samantha, who yesterday reeled off a screed of pet hates – top of the list: ‘Don’t inundate me with lots of tiny corrections. Why not instead just send me your manuscript when it’s finished.’


Requirements and costs of self-publication

6 September 2009

Not easy, nor cheap

Due to technological developments in the last 25 years, it is far easier today for private authors to prepare, typeset, produce (in printed and/or electronic form) and promote their own work – in other words, to dispense with the services of a publisher altogether. Easier, but not easy.

Self-publishing is not something done in five minutes nor is it about saving money (though an attraction for some authors is the potential to earn more by getting a bigger cut in sales). If you are venturing down the self-publishing route, be aware that you can face a lot of work and considerable costs achieving your goal.

That said, what you face here are different trade-offs: between doing the work yourself and hiring someone else (the subject of my next post), and between producing a high-quality product and turning out something that is (and can look to be) done on the cheap. Obviously, the publication format (discussed in my previous post) also has a huge effect on effort, costs and which skills are required.

In the costs stated below, $ = U.S. dollars. These rates are approximate and based on charges I have encountered for hiring freelancers. But they may also be close to the fees charged by the author-pays presses discussed in my next post.

Editing

Whichever format you settle on, there is editorial work to be done first of all. Anything that you put effort, money and your name into demands respectful treatment. This means that the work you eventually publish – whether in printed or in electronic form – is a coherent piece of scholarship, written tautly and without typos (though in my experience completely avoiding typos is probably impossible).

Therefore, once you have finished revising the text to your satisfaction, it needs to be scrutinized, to be sweated in an editorial purgatory, so that what actually is published is to the satisfaction of your readers as well. This is vital to the success of your work.

There are two kinds of editing involved: substantive editing of your text, focusing on its structure and argumentation, and copy-editing of your finalized (maybe restructured) text, focusing on its language – e.g. finding any typos and inconsistencies – and ensuring that it complies with accepted conventions. (You may find it useful consulting a publisher’s house style; many – like that for NIAS Press – are freely available on the publisher’s website).

Doing this editing yourself requires superhuman detachment from your text; most of us lack this. As a substitute for substantive editing, revisit the readers reports commissioned by the publisher(s) who rejected your work, if you have them, and seek feedback from colleagues capable of commenting fairly and fearlessly on your work (they are often hard to find). And, as for copy-editing, try to recruit your life partner or best friend – or, better still, one of those special people (often your departmental secretary or a maiden aunt) with the uncanny gift of spotting other people’s errors at fifty paces; sadly, all too often, such geniuses only spot these errors after publication.

Doing it yourself is free, though you will be wise to reward the help of Auntie Mame with serious chocolate or other forms of sincere appreciation. A freelance editor will cost you $1,500-$5,000 depending on rigour and how much substantive editing is included in the copy-editing. (I have not heard of any freelancers only offering substantive editing.)

Layout/typesetting

Most scholars using Microsoft Word or another word processor think that this is all that is required to lay out the final pages for printing. This work is definitely something they can do themselves. Think again. The design (or layout) of your book and the typesetting of the actual pages is skilled work that only really succeeds if it is invisible.

Laying out a book using a word processor is a particularly vicious form of torture. Word, for instance, may be full of features but things like the subtle adjustment of line and letter spacing are beyond its abilities.

Laying out the book yourself might cost you nothing but you would be wise to have the following things:

  • a reasonably powerful computer with a large monitor
  • a scanner (if there are illustrations to be digitized)
  • a laser printer (printing hundreds of pages on an ink-jet printer invites bankruptcy)
  • desktop publishing software including a typesetting program like InDesign, an image processor like Photoshop, and a PDF generator
  • manuals/courses on how to use this
  • fonts that you are licensed to embed in high-resolution PDF files

In addition, you will need to:

  • ensure that all of the elements of a book are present and organized correctly (e.g. the copyright page is on page iv).
  • ensure that these include all mandatory information (e.g. an ISBN)
  • adopt a standard book size (anything else is horribly expensive)
  • determine the likely extent of your book (so as to avoid unpleasant surprises – see my later post for a detailed explanation and instructions on how to calculate book length).
  • use a layout and graphical format that is printable (e.g. nothing too close to spine or edges, any images at high resolution, any colour in CMYK format)
  • carefully consider if colour is to be used (and if so where)

Alternatively, you can hire a freelance typesetter to worry about all of these and many other issues. It is common to pay either a flat fee for the entire job or on a  per-page basis (typically $6-$10 per page but inclusion of illustrations, colour, non-Latin text and other potential hassles will undoubtedly drive the price up).

Proofing

Text corruptions can happen when a Word file is converted for typesetting, without this being picked up by the typesetter. For example, recently I converted a Word file to plain text, then brought it into a web page that I was making. Only at the last moment did I discover that all of the superscript ‘th’ letters (in usages like ‘19th century’, which Word automatically converts to superscripts) had vanished.

Here, sharp eyes are needed. Yours are free but have they already looked at the text far too often to notice all the errors and last remaining typos? A proof-reader will cost you $2-$5 per page.

Indexing

No scholarly book expecting to be taken seriously (and bought by libraries) can omit an index (though it is another matter how ambitious your index is).

Good indexes are tricky to prepare. Please feel free to consult our indexing guidelines on the NIAS Press website.

The rates quoted to me by professional indexers have varied wildly – $2-$20 per typeset page.

Cover

Many publishers won’t let their authors get anywhere near the cover design, so crucial is it regarded to a book’s commercial success. Now you are responsible for producing something that doesn’t immediately scream ‘amateur’ to every bookshop you approach; what is needed is a cover that whispers ‘pick me up’. It must also meet certain technical and legal requirements (e.g. meet printers specifications and include a bar code).

The problem is that you can get a cover designer to do a proper job for about $500. But, if your book is to overcome its self-published origins in the nasty book world out there, then your cover needs to be inspired.

Printing

This is not something that you can do yourself; you are going to have to pay someone else to print your book.

Printing used to be the big barrier to self-publishing because with lithographic printing a minimum of about 1,000 copies of a book had to be printed. This required a huge investment (and a lot of spare space to store the books). Nowadays, however, the digital printing revolution has brought numbers down to single-copy printing at acceptable prices (and of an acceptable quality); self-publication of printed books is now within the reach of most budgets.

If you use an internet-based POD printer like Lightning Source, then you will be guided through the complexities of printing but will need to rigidly conform to their specifications. Set-up charges may be $75 and then you must pay for each printing order, each page printed and shipping (with a 300-page book costing you about $7 per copy), and often an annual file storage charge of $10-$20 charged.

If printing quality is an issue (because of the importance of your illustrations, for instance) and you have the belief and budget to print a minimum of 400 copies, then you are likely to get a better deal, better quality and much more human treatment by approaching a short-run printer. But be warned. ‘Real’ printers can be funny blokes; theirs is an utterly different world than yours. Many of the things that you find crucially important, they will find incomprehensible – and vice versa.

E-Book

You can of course avoid the perils (and costs) of printed publication by going down the e-route. (This option was discussed in my previous post.) However, I would suggest that you will still need to typeset your e-book and, while you avoid dealing with printers marks, bleeds and all such arcane stuff, instead you will need to meet the requirements of e-books (introducing hyperlinks, for instance). Be aware that PDF is not the only game in town (there are over 20 competing and incompatible e-book formats) nor is a computer screen necessarily the only display medium (the Amazon Kindle and iPhone being two other major destinations for e-books).

If you would rather have a professional guide you through the e-jungle, the journey may cost you thousands and thousands of dollars.

Website

An alternative to a proper e-book is to self-publish your work on a website (or even as a blog, wiki or via another Web 2.0 channel like Twitter). Though feasible, the divergence in form of a ‘proper book’ is now so wide that increasingly you will find it hard to gain any recognition for this work.

If you can do all the work yourself and have free access to/use of your institutional website, then web publishing can be almost cost free. If you set up your own website, of course, then you will have to pay small but ongoing charges for the URL registration/maintenance and for a web hosting service. Bare-bones blogs like this one are free to set up and run.

Marketing and promotion

It is not enough to produce your book; you also need to bring it to the attention of its potential readers. Many books have been written on this subject and this blog post is already much too long. Suffice to say, you will need to draw upon all of your hustling skills to bear. By all means produce a flyer, issue a press release, buy advertising space in and send review copies to appropriate journals, and cold-call different bookshops – all the sorts of things that publishers do. But the best use of your time will be to exploit your own connections, to reach out directly to other scholars in your field – via notices to mailing lists and attendance at conferences, for instance.

None of this is easy and I seriously doubt you can afford the services of a publicist.

Sales and distribution

Traditionally, getting copies of your book into the hands of readers and getting them to pay for it has been a huge problem with self-published books. This remains so if you are only looking at the old sales channels – bookshops, library suppliers, etc. – who remain suspicious of book trade outsiders. Likewise, it is difficult to sell directly to libraries as these prefer to order and pay in bulk via a library supplier and try to avoid dealing with individual publishers.

But the internet revolution has opened up whole new possibilities to reach the individual reader, your prime target. Today, it is possible to sell your book directly via Amazon Marketplace, eBay, Abe Books, etc. or indirectly via one of the above-mentioned author-pays presses. And, while it is still not cost-efficient to accept credit card payments directly from individual customers, nowadays internet-based financial services like PayPal make this relatively easy. Amazon, PayPal and the others will charge you for their services but the commission is not a lot.

Note that all of these companies help you process any sales but the actual sending of copies sold to the customer is still something that you will have to do unless your book is being printed and shipped on demand by an author-pays press. (While the business of book trade warehouses is to hold stock and process and orders, I cannot imagine that it would ever make financial sense you to use such a warehouse or for them to take you on.)

It is even possible for you to handle all aspects of sales, not just the dispatching of orders. This would be by having a website with an inbuilt retail module (shopping cart, payment processing, etc.). However, such an advanced website would not be cheap to develop; it would also be a bit of an overkill for the sake of a single book.

Legal requirements

Be aware that as a (self-) publisher selling to a public audience, you will be obliged to comply with various commercial regulations. These vary from country to country but you should expect to:

  • register an ISBN for your book (normally, a small charge)
  • deliver gratis copies of your book to your local legal deposit office(s)
  • register for sales tax

For many countries, this list is much longer.

And there’s more

This has been a very long post to write and yet the above points are not the only ones you need to consider. Moreover, space requirements – and a crass desire to sell more copies of our book (which includes perhaps twenty times as much information as found here) – have limited how much detail is included in the information presented here.

But now, decision time is looming. There is just one more thing to ponder, just who is to do all this work: you, a freelancer or a author-pays press? This is the subject of my next post.