Advances

24 November 2010

The arrival of advance copies of a book is a special moment. Emotionally, the book is out; it is real. This is the moment to feel it was all worthwhile (and to brag just a little).

There is more to advance copies than feeling good and bragging, however. They have several other purposes.

A final check

For the publisher this is a last chance to discover and rectify errors. True, the book is printed so any changes are limited unless reprinting is decided upon. But should this be necessary (or, say, an errata slip inserted in the book), then at least this can be done before the books are shipped all over the world.

Review copies

Sometimes, publishes will send advance copies of the book to a few key journals as well as to the news media. Timing is critical here. Some publications like the Library Journal in the U.S. will only accept new titles for review several months ahead of publication, the idea being that the review is before publication of the book. It may be impossibly early for ordinary advances copies to be used here and instead such early review copies are usually galley proofs but today it is just as easy (if not more so) to deliver an ‘advance copy’ specially printed by a POD printer ahead of the main litho printing.

The news media also want early review copies but here timing is even more tricky. The essential nature of the media is its short attention span and the ephemeral nature of its product (today’s news is tomorrow’s fish-and-chip paper, as we used to say). As such, any news or reviews of a book carried in the press tend to be within a few days of publication; review copies may well have been sent to the journalists only a week before. As such, publishers will only send copies to the media when they are certain that sale copies of the book will be available within a few days. Given the vagaries of shipping times, then, the publisher may judge it wise to hold back on sending such advance copies to the press or instead may send these advances but request an embargo on coverage until after sale copies of the book are available.

Obviously, such time sensitivity and media awareness only relates to those few academic books that are either timely and/or controversial.

Marketing copies

A common use for advance copies is as conference exhibits. For instance, in my own field, a key conference held each year in late March is the General Meeting of the (U.S.) Association of Asian Studies. Among the several thousand delegates attending will be librarians scouting for interesting additions to their collections. Also there will be teachers scrutinizing the latest titles in their field and deciding which (if any) should be adopted for course use in the new academic year. Ensuring that an advance copy is on view at the conference can have a major effect on sales.

For this reason, too, it is common for a publisher’s distributors to want copies of the book ahead of arrival of their shipped copies.

Reference copies

Given the competing demands for copies of the advances, it would be easy for the publisher to end up with none. This happened to me recently when inadvertently our only remaining advances of a controversial new title were exhibited and then sold at a big conference. Afterwards, it was embarrassing that I had no copy on hand when discussing the book with various concerned parties. Reference may not be a glamorous use of advance copies but it is an important one.

Author advances

That said, all things considered, in my opinion the prime use of advance copies is to reward the author with a foretaste of things to come. The hard grind finishing the book is over but equally important is the author’s promotion of her/his book in the months (and years) that follow. This vital contribution to the success of their book is not appreciated by most authors. (More about this in a later post.)

Authors may not get all of their author copies before the main shipment has arrived but it is usual that they receive one or two copies. Of course, any serious bragging at the book launch requires delivery of the main shipment (one point of the launch being to sell lots of copies to those attending) but often these advances are very useful to authors, arriving just in time to be shown at an important meeting or job interview.

Now

But such meetings and interviews are in the future.  It is now that the bell rings at the reception counter of your workplace. A courier stands there with a brightly coloured package. You sign, barely noticing as the courier leaves. Inside you can feel the copies. The Book, it has arrived, your child is born.

Enjoy the moment while it lasts. Getting a few advances from the printer is quick by courier but, as we shall see, shipping the rest of the copies to the warehouse and then out into the libraries and bookstores can take forever (or so it feels). More about that in my next post.

(Post #9 of the Printing section of a lengthy series on the book production process, the first post of which is here.)

Advertisements

Binding

9 November 2010

As I noted in my earlier post, today the bindery is often located on the premises of a printing works though traditionally it has been located elsewhere as a separate business. Anyway, wherever it is found, the bindery is a glue-sniffer’s paradise. This is because its whole purpose is to take the printed sheets and covers from the print-shop and transform them into finished books. An essential ingredient in this transformation is glue.

Binding process

In itself, the book binding process is quite straightforward though the mechanics of binding can shade between automated mass-production and the handwork of a master craftsman. The sequence is:

  1. If it hasn’t already been done at printing, each sheet is folded into signatures (usually made up of 16 pages).
  2. Typically, the signature is stapled through its centre fold so as to fasten all the pages together.
  3. The raw book block is formed by collating the signatures. This is often done by using a mechanical hand dipping into storage bins where the signatures are stored or by fetching signatures from a rotating carousel. It is possible to have material such as a colour insert tipped in (hand inserted between two signatures) but this is very expensive.
  4. The gathered signatures are clamped and bound together, then fastened to the cover (if a paperback) or binding material (if hardback). Today, this is usually done by using glue. There are many different types of binding technique (see below).
  5. The book block (or actual book in the case of paperbacks) is trimmed to size.
  6. For hardbacks, the trimmed book block is fastened to the hard case.
  7. The finished books are made ready for shipment. Sometimes they may be shrink-wrapped (especially so if the book has loose items – like a DVD – to be safeguarded from theft or accidental loss). In all cases, the books will be packed in cartons and fastened together on a pallet.

Types of binding

Although a reasonably straightforward process, there are quite a few variations in the above sequence. These mainly occur at step 4 where, essentially, the choice is between different types of binding:

  • Perfect binding (normal with paperbacks), where the folded edges of the gathered signatures are chopped off and the resulting smooth edge is then roughened and glued to the cover; or
  • Sewing or stitching the signatures to backing material (and sometimes to each other), this material in turn (at step 6) fastened to end papers, then the whole package fastened to the casing material. There are lots of different wonderful names used for these techniques (saddle stitching, for instance) as well as for the materials used (e.g. head- and tail-bands, a.k.a. wibbling).

Library binding is a variation of the latter type of binding, in essence a higher-quality piece of craftsmanship using more durable binding materials. However, the squeeze on library budgets has caused some libraries to opt for cheap paperbacks instead (where these are available), the calculation being that, if the first cheap paperback falls apart, a second copy can be bought (and, later, even a third). The accumulated cost is still less than the cost of buying a book (or rebinding it) with a library binding.

Types of covering

As noted above, there are different types of covering. Normally with books, we talk about hardbacks and paperbacks but there is more variation within these two categories:

  • Cloth binding, i.e. the hard case is covered with an artificial cloth material and the spine is embossed (usually in gold) with the author–title details and publisher’s logo. Often this cased book has a protective jacket/dust cover.
  • Semi-hardback (or super-thick paperback) using thick, flexible card over sewn or stitched signatures.
  • Conventional paperback, perfect bound.
  • Paperback with flaps.

In addition, the finished bound books may be enclosed with a protective slip case. This is more common with multi-volume sets (especially reference works) and for those single volumes needing to be seen as a prestigious and/or luxury product.

Finishing up

The last step of the binding process is of course to ship out the finished books. Some of these will go as advances to the publisher (the subject of my next post) but the bulk of the stock will be shipped to the publisher’s warehouse(s), more about that later.

(Post #8 of the Printing section of a lengthy series on the book production process, the first post of which is here.)